- Bruker AVANCETM 600 MHz Spectrometer
- The NMR Bruker AVANCE TM 600 MHz Spectrometer is mainly intended for biomedical research purposes. The magnet incorporates the key technologies of the UltraShield TM Plus magnets. The AVANCE TM III platform has three channels (SGU1, SGU2 and SGU3), the SGU1 to observe and decouple 1H and SGU2 and SGU3 for a frequency range between 109 Ag and 31 P. The magnet is equipped with 4 different probes, the 5 mm BBFO probe, 5 mm TXI 1H/13C/31P probe, HR-MAS 1H-13C-31P probe and a TCI CryoProbe Prodigy. The CryoProbe Prodigy is geared for handling either very low concentration samples or those with very high molecular weights and allows you to work at 0°C–80°C sample temperature range. The spectrometer is also equipped with a control temperature unit prepared to work at VT range (-50 °C to +50 °C).
- Bruker DPX 300 MHz Spectrometer
- The 300 MHz instrument is equipped with a 7 Tesla Oxford magnet which is controlled by a Bruker DPX-300 console. The main NMR probe for this instrument is a 5 mm Z-gradient QNP probe for the routine acquisition of 1H, 13C, 31P, and 19F. Although this spectrometer is mainly used for routine 1H and 13C NMR experiments, it can also perform standard two-dimensional (2D) experiments such as COSY, DQF-COSY, NOESY, TOCSY, HMQC and HMBC.
- Agilent 6530 Accurate Q-TOF LC/MS spectrometer
- Using True High Definition TOF technology, the system delivers exceptional data quality, providing superior mass accuracy, mass resolution, dynamic range, sensitivity and speed. The new 6530 is the ideal system for proteomics, metabolomics, impurity profiling, environmental screening and other demanding applications.
- Agilent G6460A triple quadrupole
- The Agilent Triple Quadrupole LC/MS is a liquid chromatograph triple quadrupole mass spectrometer that performs MS/MS using three sets of parallel rods (in this case, quadrupole, hexapole, quadrupole). The first quadrupole separates ions into precursor ions that are fragmented in the hexapole into product ions, which are separated by the second quadrupole. Often, two or more precursor ions and their product ions are monitored in sequence in MRM (multiple reaction monitoring) mode. You can monitor up to 4000 MRM transitions by using Dynamic MRM.
- Agilent HPLC 1260 infinity
- Based on the most often sold quaternary HPLC system new levels of performance are brought to you. A pressure range of up to 600 bar with a flow rate up to 5 mL/min allows the use of almost any column – conventional, sub-2 µm-particle or superficially porous columns. A UV, fluorescence or ELSD detector provides the data rate required for high resolution separations or fast analyses to give you highest confidence in your analytical results. And most important, with full backwards compatibility for your established methods.
- Simadzu HPLC LC-20AR
- LC-20AR (hereinafter referred to as the instrument) is a dual reciprocating plunger parallel-flow solvent delivery module. It supports a wide variety of applications for high performance liquid chromatograph from semi-micro analysis to semi-preparative separation. Also, by combining the optional recycle kit, recycle separation is available. In addition to the instrument, a high performance liquid chromatograph system requires an autosampler, column oven, detector, and system controller at a minimum.